A textile printing business may receive very different orders in the same week: a short run of sportswear panels, several rolls of polyester fabric, and a large soft-signage job with a tight delivery date. The right sublimation printer is not simply the machine with the highest number of printheads. It is the configuration that can consistently deliver the required sellable output at the intended print quality, with a transfer process that can keep pace.
This guide explains the dye-sublimation workflow and compares two-, four- and eight-head industrial printer configurations. It also gives buyers a practical way to evaluate print width, production capacity, substrate compatibility, workflow bottlenecks and operating costs before committing to a machine.
In a conventional transfer-sublimation workflow, the printer deposits special dye-sublimation ink onto transfer paper, usually as a mirrored image. Heat and pressure then transfer the dyes into a suitable polyester fabric or polymer-coated substrate. A flat heat press handles cut pieces, while a rotary calender is commonly used for continuous rolls. Printing and heat transfer are therefore two connected production stages, not one interchangeable operation.
For textile factories and print service providers, industrial roll-fed systems are suited to repeated production of fabric graphics, garment panels, sportswear, flags, soft signage and selected home-textile applications. Results depend on the fabric, inks, transfer paper, color profiles and transfer settings. White or light-colored polyester generally provides the most predictable starting point; ordinary cotton does not behave like polyester in a conventional dye-sublimation process.
Printhead count is useful when comparing machines in the same family, but it does not by itself establish an actual square-meter-per-hour output. Resolution mode, pass count, carriage design, ink limits, artwork coverage, paper feeding and machine tuning all affect production. Compare vendor test results under equivalent, documented settings.
A two-head printer can be a reasonable starting point when orders vary widely in size, staff need time for color setup, or the business values flexibility over maximum daily throughput. The critical calculation is whether the machine can complete the busiest realistic shift—not merely the average day—after test prints, cleaning and material changes.
A four-head configuration is worth evaluating when there is steady repeat business, long rolls and a need to reduce the printing queue. Additional print capacity helps only if artwork approval, paper supply, operator coverage and calender processing are ready. Buyers should ask for the same artwork printed on both configurations at a comparable quality standard.
An eight-head system should be evaluated as part of an entire production line. Higher potential printing throughput requires reliable roll handling, enough heat-transfer capacity, a stable working environment and clear preventive-maintenance procedures. For intermittent orders, a faster machine can create underused capacity rather than a better return on investment.
Request a time-stamped test using the same fabric application, image coverage, width, resolution and quality setting intended for your orders. Record accepted square meters per hour, not only mechanical printing speed. Include loading, nozzle checks, drying or paper handling, calender transfer and rejected material when estimating shift output.
Check maximum usable image width after margins rather than relying on a nominal machine class. Map it against the finished sizes of sportswear panels, flags, backdrops or home textiles. Efficient nesting can reduce wasted transfer paper and fabric; a wider printer is not always more economical for narrow, short-run designs.
Ask the supplier to validate your actual polyester fabric and transfer paper. Evaluate saturation, fine text, edge sharpness, wash-care requirements where relevant and any dye migration or ghosting after transfer. For blended, dark or coated materials, obtain test results rather than assuming all fabrics will perform the same way.
A printing machine that produces rolls faster than the calender can transfer them will simply shift the bottleneck. Compare the usable width and continuous operating speed of the transfer machine, as well as temperature uniformity and operator staffing. Transfer settings must be developed for the specific fabric, paper and ink combination.
Request a demonstration of RIP settings, ICC profiling, nozzle-check routines, paper tension control, head cleaning and daily startup/shutdown procedures. For repeat corporate or sports-team colors, evaluate color consistency over a long run and across multiple days—not just on a small sample.
Machine price is only one component. The meaningful comparison includes ink, paper, fabric, transfer energy, labor, planned maintenance, failed prints, parts availability and the cost of downtime. Consider the full line, including a calender and finishing equipment, when comparing investment options.
Start with accepted output. Suppose a business needs 420 m² of finished, saleable fabric graphics each shift. If its measured accepted output is 70 m² per operating hour, the printing stage needs 6 net productive hours (420 ÷ 70). This is an illustrative calculation—not a MYJET machine speed claim. Add allowances for loading, cleaning, color matching and unexpected stops, then verify whether the heat-transfer and finishing stages can handle the same volume.
Use this framework to test each shortlisted configuration: Required accepted output ÷ measured accepted hourly output = productive hours needed. Machines should be compared with the same job mix and the same definition of saleable output.
For a business entering roll-fed polyester textile printing or handling a changing mix of shorter jobs, begin by testing the MYJET 1802G. For regular commercial orders where printing time has become a constraint, compare its measured performance with the MYJET 1804G. If sustained production volume, long rolls and delivery schedules call for a larger-capacity line, include the MYJET 1908E in the test plan.
These recommendations are starting points, not automatic size-to-volume guarantees. Request a print demonstration using your artwork, transfer paper and intended fabric, and compare the result after heat transfer. Ask MYJET to confirm the latest machine configuration and the compatible full-line setup in writing.
Conventional dye sublimation is designed primarily for polyester and compatible polymer-coated substrates. Standard untreated cotton is not a direct equivalent. If cotton garments are your main application, discuss alternative textile printing methods instead of assuming a conventional sublimation setup will meet your needs.
Not necessarily. Head count does not translate linearly into finished output. Compare documented speed at matched quality settings and account for paper handling, transfer, finishing and acceptable yield.
For continuous roll-to-roll fabric transfer, a rotary calender is commonly part of the workflow. Cut panels and individual pieces may be handled using a suitable flat heat press. The correct choice depends on fabric format and production volume.
Conventional dye-sublimation printing does not add an opaque white ink layer. Dye-sublimation designs are most commonly produced on white or light-colored polyester. For dark garments requiring opaque white, evaluate other print technologies.
Provide the intended products, fabric composition, roll or finished-piece dimensions, target daily output, sample artwork, color requirements, available workspace and whether a calender is already installed. This gives the supplier enough context to recommend a configuration and organize a relevant test.
Choosing between two, four and eight printheads becomes easier when the comparison uses your own production conditions. Send MYJET your application, print width, expected daily volume and sample artwork. Our team can discuss the 1802G, 1804G and 1908E configurations, confirm current specifications and recommend an appropriate testing plan.
GET IN TOUCH